Tungsten alloy cube

Related Categories:Tungsten Powder,Tungsten Pipes,Tungsten Bars

Product Detailed

Tungsten alloy cube

Introduction ofTungsten Alloy cubes

Tungsten alloys generally have two-phase composites consisting of W-Ni- Fe or W-Ni- Cu or even W-Ni-Cu-Fe, some tungsten alloy is added Co、Mo、Cr, etc . Tungsten content in conventional heavy alloys varies from 85 to 97 weight percent and is the reason for their high density, the density between 16.5 and 18.5 g/cc. It could be made as various shapes, such as rod, ball, cylinder, brick, ring, etc.

1. Diameter: 3.0mm-100.0mm
2. Density: 15.8-18.50 g/cm3
3. Composition: W content: 85-97%, W-Ni-Fe, W-Ni-Cu
4. Surface: Sinter state, finish state

5. Application: balance weight, Military industry

The main performance of the tungsten alloy

As tungsten alloy cubes are high density with small capacity, high temperature resistance, high impact resistance and crack resistance, wonderful shock resistance, good corrosion resistance, High absorption capacity against X-rays and gamma rays, Good modulus of elasticity, High hardness, etc.

Appliance of tungsten heavy alloy cubes

Tungsten alloy cubes is in small volume with high density, which means it could be used in some fields need the little but heavy parts, such as the counterweights of golf club, Pinewood Derby car, aircraft, helicopter, vehicle, boat and yacht;

Military industry: penetrating projectiles, counterweights for military defense, projectiles in the missile weapons, armor piercing ammunition, prefabricated fragments.

Especially in precision instrument fields, such as mobile phone vibrator, clock cube, self-winding watches, anti-vibration toll holders, flywheel weights, etc.

牌号	状态	密度	抗拉强度	延伸率	硬度	冲击韧性
Grade	State	Density (g/cc)	UST	Elongation (%)	Hardness (HRC)	Impact toughness (MJ/m2)
W273	热处理	17.10±0.15	≥900	≥24	≥23	≥1.3
	Heat treatment
W263	热处理	17.25±0.15	≥900	≥23	≥23	≥1.2
	Heat treatment
W262	热处理	17.50±0.15	≥910	≥25	≥24	≥1.1
	Heat treatment
W261	热处理	17.60±0.15	≥920	≥24	≥24	≥1
	Heat treatment
W253	热处理	17.40±0.15	≥900	≥22	≥24	≥1.1
	Heat treatment
W252	热处理	17.65±0.15	≥920	≥18	≥24	≥0.6
	Heat treatment
W243	热处理	17.60±0.15	≥920	≥20	≥24	≥0.9
	Heat treatment
W242	热处理	18.10±0.10	≥833	≥3	≥25	≥0.1
	Heat treatment
W242A	热处理	17.90±0.10	≥910	≥10	≥25	≥0.45
	Heat treatment
W232	热处理	18.10±0.15	≥920	≥14	≥25	≥0.45
	Heat treatment
W231	热处理	18.30±0.15	≥920	≥12	≥26	≥0.3
	Heat treatment
W221	热处理	18.50±0.15	≥920	≥10	≥27	≥0.22
	Heat treatment
W173	热处理	17.20±0.15	≥600	≥2	≥26	-
	Heat treatment
W125	热处理	17.65±0.15	≥600	≥2	≥27	-
	Heat treatment
W131	热处理	18.15±0.15	≥600	≥1	≥28